AransasSession1-SP2

AransasSession1-SP2

This is a simple operating session to familiarize you with the Aransas Pass Terminal Railway. It's early in the morning and you're the engineer of 0-6-0 #54, waiting with a trainload of granite blocks on the interchange track between the APTR and the San Antonio & Aransas Pass Railway. Take your train to the Passing Siding, take the siding, and wait for the rail bus returning from Harbor Island to pass you. Then, proceed to the yard on Harbor Island and load the flatcars onto the rail barge. From there, they'll be taken over to Mustang Island, where the blocks will be used to build jetties. Be sure to use the flatcar in the ferry area as a spacer car between the locomotive and the loaded flatcars, so as not to overload the rail barge with the weight of the locomotive. Once you've loaded the flats onto the ferry, go to the turntable and turn your locomotive around. Then, pick up the boxcars and flatcars at the dockside industries in the port and return to the yard at Aransas Pass.

If you travel at realistic speeds (i.e., 25 miles per hour or less on the main line and slower in the yards), this session should take approximately an hour to complete.

In order to operate this session, you'll need the Granite Block product asset (KUID 58422:100208) from http://trainzproroutes.com/downloads/index.php.

Have fun!

AransasSession1-SP2
• a-session.jpg 15.67KB
• config.txt 12.78KB
• profile.dat 79.72KB
• profile.lyr 25 bytes
• profile.obs 1.13KB
• profile.trk 68 bytes