Post and batten fence 01

Post and batten fence 01

A 5-strand barbed-wire fence, 1.2m high, with post-and-batten construction. Typically, this type of fence is used to retain livestock.

In this updated version, two slightly different fence sections are mixed at random (theoretically in a 1:1 ratio on average) as the spline is laid out, reducing the repetition often seen in splines.

Surveyor tip: Moving or inserting spline points will change the arrangement of the different fence parts. This may be useful for achieving a more even mix of parts along the spline.

All component meshes have 3-tiered LOD. The LOD transition distances and textures have been designed to offset blurring of the fence wires at long view distances (a common problem with alpha-mapped wires in Trainz, caused by mip-mapping).

Created in gmax. Requested by Ross Stringer.

Post and batten fence 01
• $screenshot$.jpg 61.60KB
• barbed wire for lod1-barbed wire for lod1.texture.txt 75 bytes
• barbed wire for lod1.tga 256.04KB
• barbed wire for lod2-barbed wire for lod2.texture.txt 75 bytes
• barbed wire for lod2.tga 64.04KB
• barbed wire-barbed wire.texture.txt 73 bytes
• barbed wire.tga 256.04KB
• config.txt 5.32KB
• end_next_lod0.im 3.70KB
• end_next_lod1.im 2.76KB
• end_next_lod2.im 1.75KB
• end_prev_lod0.im 15.28KB
• end_prev_lod1.im 11.98KB
• end_prev_lod2.im 6.43KB
• main2_lod0.im 14.16KB
• main2_lod1.im 11.08KB
• main2_lod2.im 5.88KB
• main_lod0.im 14.16KB
• main_lod1.im 11.08KB
• main_lod2.im 5.88KB
• posts and battens norm.texture.txt 104 bytes
• posts and battens norm.tga 2.00MB
• posts and battens.texture.txt 40 bytes
• posts and battens.tga 1.50MB

VE48: This asset uses an obsolete trainz-build number. Trainz-build numbers below 3.5 are no longer supported.