Klozett RRCo Session 6 -- Hi Capacity Freight

Klozett RRCo Session 6 -- Hi Capacity Freight

This session is for the Klozett RRCo - Model Trainz Layout.

Chuck and Joe, Yard Master here here.
The Depot Foreman has allocated our little workhorse to you this morning, the 2-4-2T.
Over at Steamship you will find two depressed center flat cars.
Use these to transport:
Machine Crate Load from the Wharf Freight House to ACME, then
84 in Flywheel and 84 in Press Frame from ACME to the hoist at Foundry and finally
citern from ACME to Crane Wharf.
Spot the empty flats back at Steamship.
When finished reposition the locomotive in the Loco Depot and sign off.
Yard Master out.

Use the map view (Ctrl-M toggles on / off in Driver) to locate the industries and freight cars.
All industries have the prefix IND.
Cab Mode is preferable. In DCC Mode the locomotive may not have sufficient power to negotiated the sharp curves.
You can perform the tasks in any sequence you choose.
In this session you will have to perform the task of Load Master to load and unload freight cars.
For instructions about the method to be used, see my post in the Klozett RRCo thread in the N3V Trainz forums. Or search youtube using:
Trainz T:ANE - Loading Freight Cars in Driver

I have added the required commodities to the kuid table of the session but I am not sure if they will be captured by Content Manager. If they are not you will need to manually download five commodities:
84_in_Flywheel_Casting
84_in_Press_Frame_Side
citerne_RB
Machine Crate Load MT Large 1
Machine Crate Load MT Large 2

Good luck.

Klozett RRCo Session 6 -- Hi Capacity Freight
• config.txt 6.07KB
• profile.dat 30.20KB
• profile.lyr 28 bytes
• profile.obs 36 bytes
• profile.rlr 36 bytes
• profile.trk 68 bytes
• thumbnail.jpg 34.89KB